equivalent material of p265gh , vessel plate mill

Pageviews:

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with equivalent material of P265GH ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

ASTM A537 are primarily intended for fusion welded pressure vessels and structures. Steel plates under this equivalent material of p265gh specification are available in three classes classified according to the different heat treatment: Class 1 (normalized), Class 2 (quenched and tempered) and Class 3 (quenched and tempered). The maximum thickness of plates furnished under this specification is 4 in. [100mm] for Class 1 and 6 in. [150mm] for Class 2 and Class 3.

The effect of nitrogen on steel performance is similar to that of carbon and phosphorus. With the increase of equivalent material of p265gh nitrogen content, the strength of steel can be improved, plasticity especially toughness can be significantly reduced, weldability becomes worse, and cold brittleness is intensified. Nitrogen with aluminum, niobium, vanadium and other elements can reduce its adverse effects, improve the performance of equivalent material of p265gh steel, can be used as an alloying element of low alloy steel.