Grade p235gh material specification for welded boilers

Pageviews:

The advantages of P235GH material specification, seamless steel pipe are high pressure resistance, good toughness, long pipe section and few joints. It is widely used and the rolling technology of domestic steel mills is also very mature. Compared with round steel, the weight of seamless steel pipe is lighter under the same strength. Seamless steel pipe manufacturing ring parts, can improve the utilization of materials, simplify the manufacturing process, save materials and processing time. Compared with the welded pipe, there is no weld on the outer surface of seamless steel pipe, and it has good compression resistance.

The steel such as p235gh material specification delivered in the hot-rolled state has a certain degree of corrosion resistance due to the high temperature, so it can be stored in the open air. However, this layer of oxide scale also makes the hot-rolled steel surface rough and the size fluctuates greatly. Therefore, the steel with smooth surface, accurate size and good mechanical properties is required to be produced by using hot-rolled semi-finished products or finished products as raw materials and then cold rolling.

p235gh material specification, 10CrMo9-10 steel plate is usually delivered in the normalized and tempered state under 60mm thickness, normalized and tempered or quenched and tempered state of thickness greater than 60mm to 100mm, and delivered in the quenched and tempered state greater than 100mm to 250mm. According to the negotiation between the supplier and the demander, the goods can be delivered without processing.

p235gh material specification products 2020 online supply: 6*1950*10000, 6*2000*10000, 6*2200*10000, 6*2800*12000, 7*2200*8000, 7*2920*8200, 7*2920*8780, 2200*11200, 8*2200*5730, 8*2210*11000, 8*2400*12000, 9*2300*6870, 12.5*2900*11000, 12.9*2987*10384, 13.6*2940*11455, 14*1950*10900, 14*1950*10950, 14*1950*11000, 14*1950*8000, 14*2000*13500, 22*3400*13000, 23.1*2590*7790, 25*1600*9300.