Export 412 tons 16mo3 material group plate to Myanmar in 2015
EN-BOILER Steel provides high-quality boiler steel to many natural gas.
Oil and petrochemical companies and is well-known worldwide.
Export 412 tons 16mo3 material group plate to Myanmar in 2015
According to the difference of 16Mo3 material group automatic steel plate cutting and semi-automatic cutting, the distance of each cutting gun is adjusted, the trailing amount is determined, and the slit compensation is considered.In the cutting process, the size and direction of the Angle of the cutting gun are mainly determined by the thickness of the steel plate.
The basic phases of 16mo3 material group, structural steel in the annealed state are ferrite and carbide. The alloy elements are dissolved in ferrite to form alloy ferrite, which depends on solid solution strengthening to increase strength and hardness, but at the same time reduce plasticity and toughness. The addition of alloying elements reduces the carbon content of the eutectoid point, which increases the proportion of pearlite in the structure and reduces the distance of the pearlite layer. This also increases the strength of the steel and reduces the plasticity.
Tata Steel Europe plans to cut 1250 jobs. Henrik Adam, CEO of Tata Steel, said: "the financial situation of Tata Steel Europe is very serious at present, and there is an urgent need to improve the company's performance and financial situation." Tata Steel has decided 16mo3 material group in November 2019 to cut 3000 jobs in its European operations to reduce costs. After a period of negotiations with the European labour Commission, the layoff plan cut that number by more than half, minimizing unemployment. Tata Steel has about 20000 employees in Europe.
As for the named of P355M steel, P is short for steel for pressure vessels and boilers. The number 355 stand for the minimum yield point should be 355 Mpa for this steel. M is short for the heat treatment of thermomechanically rolling and do low temperature impacting test at -20°C.