High tensile strength EN standard p295gh sheet with MTC certificate
EN-BOILER Steel provides high-quality boiler steel to many natural gas.
Oil and petrochemical companies and is well-known worldwide.
High tensile strength EN standard p295gh sheet with MTC certificate
Pageviews:
EN standard P295GH sheet, 15Mo3 steel plate is a kind of pearlitic heat-resistant steel, which can still show characteristics at higher temperature and under long-time load. 15Mo3 steel plate is used for heating surface of low and medium pressure boiler (working pressure is not more than 5.88MPA, working temperature is below 450℃). Chemical elements of 15Mo3 steel plate: C: 0.12-0.20, Si: 0.10-0.35, Mn: 0.40-0.80, P: ≤ 0.030, S: ≤ 0.030, Cr -, Mo: 0.25-0.35.
X-rays or γ-rays are projected on the surface of the steel plate, and rubber can be placed on the other side of the steel plate. Since the radiation propagates through the steel plate and is absorbed, the intensity is different due to the presence or absence of defects, so the film can record the shape and position of the defects. This EN standard p295gh sheet method is sensitive to the detection of common steel plate defects such as slag inclusions, porosity and pores. The disadvantage is that it is difficult to find the specific depth of the defect and it is not easy to find cracks.
Pakistan's iron and steel industry has suspended EN standard p295gh sheet production and operation since the outbreak, the dawn reported on April 8. Last month, Prime Minister Imran announced a rescue package for the steel industry. Recently, Pakistan's steel industry called for the resumption of production as soon as possible.
What are the characteristics of medium and thick plate, EN standard p295gh sheet? First, the performance of shock resistance and vibration is very good, so the application of medium and thick plates in buildings and bridges can greatly improve the safety. Second, the bearing capacity of medium and thick plate, EN standard p295gh sheet is good, the performance is excellent. The bridge, the automobile girder steel plate, and buildings have strict load-bearing requirements, and it is easy to cause accidents if the steel materials not meet the requirements, so the selection of steel is more stringent.