p355gh material standard used for main steam pipe material

Pageviews:

Ordinary medium and thick steel plate P355GH material standard is a kind of deoxidized steel. The oxygen content of the steel liquid is relatively high, and a lot of gas will be produced during the production process to make the steel liquid boil, so it is also called boiling steel. Advantages: this kind of steel plate has smooth surface, good quality and easy processing. Because this kind of steel plate has no concentrated shrinkage cavity, the amount of deoxidizer is very small and the price is lower than other steel plates.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.

p355gh material standard, 13CrMo44 steel plate is a kind of steel which with Cr, Mo,Cr-Mo and mainly used for pressure vessels. The steel grade 13CrMo44 is according to DIN 17155 standard which with the yield strength of 242MPa. The DIN 17155 13CrMo44 steel plate chemical composition is the content of C is 0.15, Mn is 2.00, S is 0.03, Cu is 0.30, Si is 1.00, P is 0.045, Cr is 17 or 19 and the Ni is 8 or 10.

Laser cutting is that the horizontal laser beam emitted by the laser changes into a vertical downward laser beam through the 45° total reflector, and then focuses through the lens, forming a tiny spot at the focal point. When the spot hits the material, the material is heated to the vaporization temperature quickly, and evaporates to form a hole. With the movement of the beam on the material such as p355gh material standard, the auxiliary gas (carbon dioxide gas, oxygen, Nitrogen, etc.) blow away the melted slag, make the hole continuously form a very narrow width (such as about 0.1mm) cutting seam, and complete the cutting of materials.