16mo3 astm equivalent chemical composition

Pageviews:

By Region: data shows that in the first quarter of Asia, crude steel 16Mo3 astm equivalent production was 315.2 million tons, down 0.3% year on year. Crude steel production in the EU region in the first quarter was 38.3 million tons, down 10.0% year on year. The output of crude steel in North America in the first quarter was 29.5 million tons, down 4.0% year on year. According to the output ranking, according to the latest data of the 16mo3 astm equivalent world iron and Steel Association, the output of crude steel in the top ten countries in March 2020 was 126 million tons (85.71% of the world), and the output of crude steel in the first quarter was 376 million tons (85.07% of the world).

Considering the large workload of allocation and transportion for our steel materials, we have built special shipping department, and make it independent form transportation department. The transportation department is in charge of transporting steel materials from our mill and warehouse to the port, and our shipping department is in charge of the shipping matters. So that our whole shipping efficiency is improved, and shorten time for customers to receive goods.

40Cr alloy belongs to gb3077 "alloy structural steel". The carbon content of 40Cr steel is 0.37% ~ 0.44%, which is slightly lower than that of 45 steel. The content of Si and Mn is equivalent, and the content of Cr is 0.80% ~ 1.10%. In the case of hot rolling supply, the 1% Cr basically does not work, and their mechanical properties are roughly the same. Because the price of 16mo3 astm equivalent is about half of that of 45 steel, 40Cr is not needed for the purpose of economy.

Chemical composition of 42CrMo seamless steel pipe: C: 0.38-0.45, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.90-1.20, Mo: 0.15-0.25, V: 0.15-0.30. Mechanical properties of 42CrMo seamless steel pipe: tensile strength: 1080 MPa, yield strength: 930 MPa, elongation after fracture: 12%, reduction of area: 45%, impact energy: 63J. Due to the effect of carbon and chromium content, 16mo3 astm equivalent, 42CrMo seamless steel pipe has better strength and hardenability, higher fatigue strength and resistance to multiple impact after quenching and tempering, good impact toughness at low temperature and no obvious temper brittleness. It is generally used after quenching and tempering.

The Indian customer purchased our A516 Gr 70 pressure vessel steel plates to make tanks. They have very strict requirement for raw materials quality. For the A516 Gr 70 pressure vessel steel plates, they asked for Normalizing, 0℃ impact, A578 UT test, PWHT and so on tests, our Q/C department witness the production process with the technician from the customer company together. Meanwhile, we arrange BV inspection to check the quantity, spray mark, stamp on the A516 Gr 70 pressure vessel steel plates, and so on.

The gas cylinder steel is one of our featured products. The pickled LPG steel is available. We supply gas cylinder steel coil, gas cylinder steel sheet and gas cylinder 16mo3 astm equivalent steel plates. Welcome to consult any question about gas cylinder steel or LPG steel, such as JIS G3116 SG295 coil price, SG255 material properties, SG325 plate dimensions, HP265 equivalent, P245NB steel properties, etc. We are always here to serve you.