1inch p265gh material Hot Rolled Plate

Pageviews:

45# steel is a common medium carbon quenched and tempered structural steel. The cold plasticity of 45# steel is general. Annealing and normalizing are slightly better than P265GH material quenching and tempering. 45# steel has higher strength and better machinability. After proper heat treatment, 45# steel can obtain certain toughness, plasticity and wear resistance. 45# steel is suitable for hydrogen welding and argon arc welding, not suitable for gas welding.

Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This p265gh material alloy steel p265gh material still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.

Semi-endless rolling technology has three advantages: the p265gh material product's limit thickness and limit width specification range has been significantly expanded. The thinnest thickness of SPHC steel has been expanded from 1.0 mm to 0.78 mm, and the limit specification product width has been expanded from 1100 mm to 1300 mm; The thinnest thickness of Q235B steel has been expanded from 1.2 mm to 1.0 mm, and the width range of the limit specification products has also been further expanded.

If you want to get the ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates steel price, please do not hesitate to contact us. Any need in p265gh material ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us

Both parties shall confirm the p265gh material material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the p265gh material steel plant.