260 tons 4140 alloy and p265gh en 10028-2 delivered to Ukraine

Pageviews:

How to choose the material and specification of P265GH en 10028-2, boiler tube? First, select the specification according to the actual use. Secondly, material: the suitable boiler tube material is different for different use scenarios. Thirdly, the wall thickness of the boiler tube should be strictly in accordance with the relevant standards. If the thickness is not up to standard, it is easy to cause accidents, so it must be strictly controlled. Finally, the boiler tube should be checked in time when receiving the goods, and the relevant instruments should be used to detect whether the steel quality has reached the standard, if not, it can be rejected.

In November of 2015, Thailand one company contacted with us from Internet. They are find the trustable supplier of S355J2H seamless pipe p265gh en 10028-2 for there cable car supporter. Due to the special using of the pipes, they are very careful and servious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and proucts quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1400 tons pipe to us directly.

40Cr steel belongs to alloy structural steel. p265gh en 10028-2, 40Cr steel has good comprehensive properties, low temperature impact toughness and low notch sensitivity after quenching and tempering on the basis of high-quality carbon structural steel No. 40. 40Cr steel mechanical properties: tensile strength: ≥ 980mpa, yield strength: ≥ 785MPa, elongation after fracture: ≥ 9%, elongation after fracture: ≥ 45%, impact absorption energy: ≥ 47J. 40Cr steel chemical composition: C: 0.37-0.44, Si: 0.17-0.37, Mn: 0.50-0.80, Cr: 0.80-1.10.

Our products have perfect after-sales system to protect the interests of customers. At the same time, we can according to p265gh en 10028-2 customer's requirements, processing requirements, cutting technical requirements, etc., to develop detailed solutions for customers, so as to make customers 100% satisfied. If you have any requirements and needs, please contact us in time.