Do you need 16mo3 plate stock

Pageviews:

P355NL1 steel tensile strength Rm:630-450MPa.If high demands are made on notch impact strength and aging resistance. It is mainly used in steam boiler and pressure vessel construction. 16Mo3 plate, P355NL1 plates can be processed with all known welding methods. Welding is possible both with the machine and by hand. Preheating is usually not necessary unless the outside temperature is below 5°C. Then preheating to about 150°C is recommended.

At the same time of doing well in 16mo3 plate production and operation, Yunnan company focused on completing the four phases of technical transformation construction projects, realizing industrial upgrading, improving equipment level, and laying a good foundation for the future development of the company. In the 16mo3 plate technological transformation project, pollution control facilities have been built synchronously, and a large number of comprehensive utilization projects, such as comprehensive sewage treatment and recycling project, blast furnace gas waste heat and residual pressure power generation, have been invested and constructed.

Nickel element is mainly used to form and stabilize the austenite structure, so that the 16mo3 plate steel has good mechanical properties, corrosion resistance and process performance. Molybdenum can quickly passivate stainless acid-resistant steel, and improve the corrosion resistance to solutions containing chloride ions and other non-oxidizing media. Titanium and niobium are usually used to fix the carbon in alloy steel and make it generate stable carbides to reduce the harmful effect of carbon on the corrosion resistance of alloy steel.

"The production method of seamless steel pipe can be roughly divided into cross rolling method (menesmann method) and extrusion method. The cross rolling method (menesmann method) is to pierce the tube blank with the cross roll first, and then extend it with the rolling mill. This method is fast in production, but requires high machinability of tube blank. It is mainly suitable for producing carbon steel and low alloy steel tube, 16mo3 plate tube.The extrusion method is to pierce the billet or ingot with a piercer, and then extrude it into a steel tube with an extruder. This method is less efficient than the cross rolling method and is suitable for the production of high-strength alloy steel tubes."

The results of adopting two-level 16mo3 plate service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and 16mo3 plate after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.