Export 15mm p235gh mechanical properties factory price

Pageviews:

14Cr1MoR plate is suitable for manufacturing medium temperature pressure vessels with service temperature less than 500℃The surface hardness of 14Cr1MoR steel plate is 270-340HB Brinell hardness.P235GH mechanical properties, 14Cr1MoR and 12Cr2Mo1R steel plates are suitable for petrochemical, nuclear power, steam turbine cylinder, thermal power and other high-temperature and high-pressure large-scale equipment that is connected to hydrogen or hydrogen mixed media.

According to the data released by the Japan iron and Steel Union (JISF), the export volume of Japanese steel in the second quarter of 2020 p235gh mechanical properties is about 4.959 million tons, a year-on-year decrease of 14.2%; the export volume in the first half of 2020 is about 11.07 million tons, with a year-on-year growth of 1.8%. It has been revealed that the year-on-year increase in export volume does not mean that Japan's export p235gh mechanical properties situation of Pugang is better in the first half of the year, but only because the base number of the same period last year is too low.

The mechanical properties of hot rolled steel plate are far less than that of cold working and forging, but the p235gh mechanical properties, hot rolled steel plates have better toughness and ductility. Cold rolled steel plate has a certain degree of work hardening and toughness is low, but it can achieve a better yield ratio, and can be used for cold bending spring leaf and other parts. At the same time, because the yield point of cold rolled steel plate is close to the tensile strength, the danger is not foreseen in the use process, and accidents are prone to occur when the load exceeds the allowable load.

In order to obtain the seamless tube with smaller size and better quality, the method of cold rolling, cold drawing or the combination of the two must be used. Cold rolling is usually carried out on a two high mill, and p235gh mechanical properties pipes are rolled in a circular pass composed of a variable cross-section circular groove and a fixed conical head. Cold drawing is usually carried out on single chain or double chain cold drawing machines of 0.5-100t.