Export great p355gh boiler material grade to Malaysia

Pageviews:

In 2019, our company has decorated the office building for newlook. We also make the cultural wall with various photos. These photos are a combination of P355GH boiler material grade BBN Group various activities that record the company's beautiful memories in recent years. Among them are photos of the p355gh boiler material grade company's annual meeting, photos of group trips, pictures of factories, party pictures, photos of outdoors organized barbecues, photos of winter sports, pictures of table tennis matches. The BBN steel company has rich staff activities and pleasant staff life.

Our quality control department will do inspection for details of the steel materials p355gh boiler material grade before delivery. We would invite the customer side to attend the inspection together. If they can not come, we will also take rich pictures for them to check. Meanwhile, we will publish inspection report and send them the PDF version. Besides, we accept any third party inspection such as SGS, BV, etc. And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier.

SA516Gr60 material, SA516Gr70, SA516Gr60N, SA516Gr70N steel plate in thickness ≤1.5in (40mm) is usually supplied in rolled state. The plate can also be ordered according to normalizing or stress relief, or normalizing plus stress relief. SA516Gr60 steel plate when thickness> 1.5in. (40mm) should be normalized. Unless otherwise specified by the customer, p355gh boiler material grade, SA516Gr60 steel plate (thickness ≤40mm) should be normalized when there is a notch toughness requirement.

P235GH steel material number under EN10028-2:2003 standard is 1.0345. This steel is a European pressure vessel steel. P235GH Mechanical properties: Tensile strength σb (350 ~ 480 MPa); Yield strength σs(215 MPa min.); Elongation ≥25%; Brinell hardness ≤105 ~ 140. p355gh boiler material grade, p235gh steel chemical composition (mass fraction,%): ≤0.16 C; ≤0.35 Si; 0.60 ~ 1.20 Mn; ≤0.025 P; ≤0.010 S; ≤0.30 Cr; ≤0.30 Ni; ≤0.30 Cu; ≤0.08 Mo; ≤0.02 V; ≤0.02 Nb; ≤0.012 N; ≤0.020 Al; ≤0.03 Ti.

The Seamless Pipe Q345D to Thailand. In November of 2015, Thailand OTTO group contacted with us from Internet. They are finding the trustable supplier of S355/2H seamless pipe for the cable car supporter. Due to the special using of the pipes, they are very careful and serious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and products quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1800 tons pipe to us directly.

As leading EN10025-6 S460QL structural steel plates supplier in China, our company has supplied hundreds of thousands tons S460QL steel plates to clients to assist them finish one after another p355gh boiler material grade magnificent projects.