Hot rolled p265gh steel number carbon structural

Pageviews:

When 321 stainless steel contains about 18% Cr, 8% to 25% Ni, and about 0.1% C, it has a stable austenite structure. Austenitic chromium-nickel stainless steel includes the famous 18Cr-8Ni steel and high Cr-Ni series steel developed by adding Cr and Ni content and adding Mo, Cu, Si, Nb, Ti and other elements on this basis. Because 321 stainless steel has comprehensive and good comprehensive properties, it has been widely used in all walks of life.

The company adheres to the "variety, quality and efficiency" road. We have established a technology center, a brand cultivation management system and a quality control system. Now the company has formed an independent innovation system integrating P265GH steel number production, learning, research and marketing. Our company has passed ISO9001 quality management system certification and ISO10012 measurement management system certification.

Laser cutting p265gh steel number has no burr, wrinkle and precision is high. It is superior to plasma cutting. Laser cutting has good cutting quality, narrow cutting width (generally 0.1-0.5m m), high accuracy (generally 0.1-0.4mm hole center distance error, 0.1-0.5mm contour dimension error), good surface roughness (generally Ra is 12.5-25μm), and the p265gh steel number cutting seam can be welded without further processing. Fast cutting speed: for example, with 2kW laser power, the cutting speed of 8mm thick carbon steel is 1.6m/min.

p265gh steel number, Wear-resistant steel plates are composed of two parts, namely carbon steel plate and alloy wear-resistant layer. Under normal circumstances, the thickness of the alloy wear-resistant layer of the wear-resistant steel plate is 1/3-1/2 of the total thickness. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity against external forces. And the alloy wear-resistant layer provides wear-resistant properties to meet the requirements of specified working conditions.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.