Manufacture price of en standard p295gh steel

Pageviews:

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as en standard P295GH steel, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.

The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.

20G steel is a common carbon steel used to manufacture boilers. The performance of 20G steel is basically the same as that of 20# steel. The requirements for impact toughness, strain aging impact value and cold bending of 20G steel are increased. The yield ratio of 20G steel is slightly higher, and certain fatigue and corrosion resistance are required for en standard p295gh steel steel to ensure the safe operation of boilers. 20G steel is suitable for manufacturing marine boilers, steam boilers and other boiler accessories with pressure less than 6Mpa and wall temperature less than 450 ℃.

Temperature has a great influence on the strength of the material, en standard p295gh steel. When the temperature exceeds a certain value, the strength limit of the steel will be reduced. The higher the temperature, the lower the strength. In addition, the longer the steel is used at high temperature, the lower the strength. Therefore, if the steel works at high temperature for a long time, the instantaneous strength of the steel can not be used as its performance index, nor can the room temperature performance replace the high temperature performance.