Mild steel p295gh en 10028-2 vs shipbuilding steel

Pageviews:

The company is based on the principle of good faith, small profits and quick sales, and keeps forging ahead. In the fierce market competition, with P295GH en 10028-2 good cooperation and sincere service spirit, we win the trust of our customers and develop rapidly. We will create a win-win situation with our customers and create a better future with the belief of pioneering, pursuing excellence and learning.

EN10025-6 S690 steel is a quenched and tempered high-strength non-alloy steel plate. The series of grades are S690Q, S690QL, and S690QL1. They are in accordance with the European standard EN10025-6. The steel specified in this standard can be used for the production of hot-rolled plates with steel grades p295gh en 10028-2, S460, S500, S550, S620, S690, S890, S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm.

Our prime quality high strength structural stel plates retain the acidic attacks in tough climatic environments. These steel plates are heat-treated at very high temperatures of the heat; further, these are cold and hot workable steel. Our plates and sheets have excellent superior weldability. A572 Gr.50 dual certified plates p295gh en 10028-2 undergo many tests after the production such as corrosion test, pitting corrosion test, flattening test, flaring test, radiographic test and so on.

Quenching and tempering (QT) is a double heat treatment process of quenching and high temperature tempering. In general, medium carbon steel and medium p295gh en 10028-2 carbon alloy steel often need quenching and tempering treatment. Quenching and tempering can make iron and steel parts obtain a good combination of strength and toughness, with high strength, excellent toughness, plasticity, cutting performance, etc. Some p295gh en 10028-2 alloy steel or low alloy steel must be quenched and tempered to obtain good comprehensive properties. These steels can also be called quenched and tempered steels.

p295gh en 10028-2, Grade P295GH chemical composition under EN10028-2:2003 is displayed as follows. Chemical composition (C: 0.08 to 0.20; Cr: ≤0.30; Si: ≤0.40; Cu: ≤0.30;Mn: 0.90 to 1.50; Mo: ≤0.08;P: ≤0.025; Nb: ≤0.020;S: ≤0.015; Ni: ≤0.30;Al: ≤0.020; Ti: 0.03; N: ≤0.012; Vi: ≤0.02). The yield Strength MPa (min) of p295gh steel plate with thickness less than 16mm is 295MPa, and the tensile strength is 460-580MPa.

After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.