p235gh carbon steel vs european alloy steels

Pageviews:

The company now has P235GH carbon steel oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than p235gh carbon steel 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

Q345 is a steel material. It is a low alloy steel (C < 0.2%), with good comprehensive properties, low temperature properties, cold stamping properties, p235gh carbon steel welding properties and machinability. Q345 steel is subdivided into Q345A, Q345B, Q345C, Q345D and Q345E. This is the grade distinction, which represents that the impact temperature is different! Q345A, no impact; Q345B, impact at 20 degrees normal temperature; Q345C, impact at 0 degrees; Q345D, impact at - 20 degrees; Q345E, impact at - 40 degrees. At different impact temperature, the impact value is different.

The five advantages of p235gh carbon steel wear-resistant steel plate can reduce its own weight. The steel plate is designed according to the addition of several required alloy elements. Through the special heat treatment method of steel plate, the strength level of p235gh carbon steel steel plate is improved to make it have high hardness (wear resistance) corresponding to various specifications. The result is a significant reduction in the weight of the structure.

TMCP process is an indispensable technology for our production of low alloy high strength wide and p235gh carbon steel thick steel plates. TMCP process can produce steel with high strength and toughness without adding too many alloy elements and complex subsequent heat treatment. TMCP is a process that can save alloy p235gh carbon steel and energy and is beneficial to environmental protection. A lot of our shipbuilding steel plates are produced by TMCP process.

ASTM a588 is a high strength low alloy HSLA steel (high strength, low alloy) containing a small amount of alloying elements copper, chromium and AMP. Nickel. These alloying elements effectively improve the properties of a588 and expand its application range. Firstly, the alloy composition increases the p235gh carbon steel yield point strength to 50 Ksi and the tensile strength to 70 Ksi. Secondly, a588 p235gh carbon steel has high copper content, atmospheric corrosion resistance and long working time. Because of its excellent comprehensive performance, a588 angle steel is widely used in bridge, building and other structural fields.

After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.