p265gh steel element exported to Dubai

Pageviews:

41Cr4 (1.7035) material is an alloy structural steel grade commonly used internationally. Its tensile strength, yield strength and hardenability are all higher than that of 40# steel, but it also has certain defects that its weldability is limited and there is a tendency to form cracks. 41Cr4 steel is generally used for more important quenched and tempered parts, such as parts that work under alternating loads, medium speed and medium load parts.

The company adopts modern management concept, adheres to “quality for survival, integrity for development”, and provides customers with high-quality and reliable P265GH steel element steel products and wholehearted service. The company continuously deepens the internal reform of the enterprise, innovates in the reform, develops in the innovation, and gradually forms a set of management and operation mechanism which adapts to the market and has strong competitiveness.

Normalizing is to heat the steel parts to 30~80℃above the critical temperature for a period of time. Then the parts are taken out of the furnace and cooled in air. Since the cooling rate of normalizing is faster than that of annealing, the strength and hardness of normalized p265gh steel element are higher than that of annealed p265gh steel element, but the elimination of internal stress is not as good as annealing. The normalizing operation of p265gh steel element is simple, the cost is low, the productivity is high, and it is widely used in actual production.

The work performance of p265gh steel element etc. steel material is mainly depended on its chemical composition, mechanical properties etc. parameters. The higher strength the steel has, the less quantity steel is needed to achieve same strong effect of the steel structure. However, the steel strength varies with the thickness. So please take steel thickness into consideration when evaluating the steel strength. For a certain steel, its strength also has something to do with the steel shape. For example, for a same steel grade, the steel strength is different for steel plates and pipes.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.