p295gh material equivalent sheet properties and usage

Pageviews:

In recent years, in line with the development trend of iron and P295GH material equivalent steel industry at home and abroad, we have accelerated the transformation of development mode, promoted structural adjustment, and formed a rich product series of medium and thick plates, hot rolled steel coils, profiles, steel pipes, etc., which p295gh material equivalent are widely used in automobiles, long-span bridges, railways, machinery, ocean and so on fields. Meanwhile, we also provide deep processing for the steel materials.

ASTM A633 standard covers four grades A, C, D, and E normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. p295gh material equivalent, A633 Grade A structural steel provides a minimum yield point of 42 ksi [290 MPa] in thicknesses through 4 in. [100 mm], inclusive. Grades C and D provide a minimum yield point of 50 ksi [345 MPa] in thicknesses up to 2.50 in. [65 mm], inclusive and 46.0 ksi [315 MPa] in thicknesses over 2.50 in. to 4.0 in. [65 to 100 mm], inclusive.

The cold working performance of p295gh material equivalent and so on steel structure engineering steel is good, which can ensure that the steel will not crack or brittle fracture during high-temperature processing, and will not have a great impact on strength, plasticity and toughness due to processing. The durability of p295gh material equivalent and so on steel structure engineering steel is good. Durability refers to the service life of steel structure. The main factor affecting the service life of steel is the poor corrosion resistance of steel, followed by the deterioration of mechanical properties of steel under long-term load, repeated load and dynamic load.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This p295gh material equivalent rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.

16Mo3 alloy are featured by the good heat resistance and corrosion resistance. 16mo3 steel plate chemical composition(%):C: 0.12 ~ 0.2 Si: ≤0.35 Mn: 0.4 ~ 0.9 P: ≤0.025 S: ≤0.01 Cu: ≤0.3 Ni: ≤0.3 Cr: ≤0.3 Mo: 0.25 ~ 0.35 Al: ≥0.02 N: ≤0.012. 16Mo3 alloy steel mechanical properties:Yield strength (MPa) 372MPa, Tensile strength (MPa) 350MPa, Elongation (%) ≥22. Impact temperature (℃) 20, Impact energy value (J) 335J / cm². p295gh material equivalent, 16Mo3 steel plate is widely used in petroleum, chemical, power station, boiler and other industries.

The results of adopting two-level p295gh material equivalent service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and p295gh material equivalent after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.