The demand for p265gh en 10028-2

Pageviews:

Our company's P265GH en 10028-2 power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the p265gh en 10028-2 utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

Q420q material is a kind of structural steel plate for bridges, and there are three quality levels Q420qD, Q420qE and Q420qF. When the Q420q plate is required to have the performance in the thickness direction, the symbols Z15, Z25, Z35 representing the performance level in the thickness direction are added after the above-mentioned grades. Namely Q420qDZ15, Q420qDZ25, Q420qDZ35, Q420qEZ15, Q420qEZ25, Q420qEZ35, Q420qFZ15, Q420qFZ25, Q420qFZ35.

The cold rolled sheet does not produce scale because it is rolled at room temperature. Therefore, the surface quality of cold plate is good and the dimension precision is high. In addition, the mechanical and technological properties of cold rolled coil are better than that of hot-rolled steel sheet. In many fields, especially in the field of home appliance manufacturing, it has gradually replaced hot-rolled steel sheet, p265gh en 10028-2.

Three advantages of semi-endless rolling technology: 1. The limit specification of Q345B steel is expanded from 1.5 mm × 1300 mm to 1.5 mm × 1600 mm. 2. the semi-endless rolling technology can effectively reduce the fluctuations in the temperature, size, and shape control accuracy of the strip head and tail. 3. The different parts of the strip steel p265gh en 10028-2 produced by semi-endless rolling have uniform structure and mechanical properties, the yield strength fluctuation is less than 40 MPa, and the tensile strength fluctuation is less than 20 MPa.

The executive standard of P235TR1 steel is EN 10216-1. p265gh en 10028-2, P235TR1 steel is suitable for manufacturing pipes, vessels, equipment, pipe fittings and steel structures. Chemical composition of P235TR1 steel: C ≤ 0.16, Si ≤ 0.35, Mn ≤ 1.2, P ≤ 0.025, S ≤ 0.02, Cr ≤ 0.30, Mo ≤ 0.06, Ni ≤ 0.30, Cu ≤ 0.30, Nb ≤ 0.01, Ti ≤ 0.04, V ≤ 0.02. Chemical composition of P235TR1 steel: tensile strength 360-500 MPa, yield strength ≥ 235 MPa, elongation ≥ 25%. The main steel pipe grades under EN 10216-1 are P195TR1, P195TR2, P235TR1, P235TR2, P265TR1 and P265TR2.

In addition to quality assurance, service is also important for the competition of steel suppliers. All the after-sales service personnel of the company have received professional training and assessment. The steel products supplied by our company enjoy the life-long quality problem replacement service. In the process of using our steel p265gh en 10028-2 products, if there is any problem, just contact us in time, and our after-sales service personnel will look for countermeasures and solve the problem with you as soon as possible.