Tianjin factory hot rolled iron 16mo3 material equivalent

Pageviews:

The whole plant covers an area of 18,480 square meters, a workshop area of 9,500 square meters, and a final assembly workshop of 4,300 square meters; fixed assets are 25.50 million yuan. The company has 16Mo3 material equivalent strong technical force, complete quality assurance system sophisticated tooling equipment and advanced technology. It can provide high efficiency professional equipment and 16mo3 material equivalent pressure vessels for domestic and foreign chemical, petroleum, chemical, metallurgical, pharmaceutical, fertilizer, textile, and environmental protection industries.

ASTM a992 steel 16mo3 material equivalent is recognized as the most suitable steel for wide flange beam in the world. It contains a variety of alloy elements, such as vanadium, niobium, copper, nickel, chromium and molybdenum, which greatly improve 16mo3 material equivalent its strength and other properties. For example, the mechanical properties are much better than the tensile strength 65ksi and yield strength 65ksi of a572-50 and A36. Therefore, a992 wide flange beam (H beam) generally replaces a572-50.

The difference between cold rolled steel sheet and hot rolled steel plate. The carbon content of 16mo3 material equivalent, hot rolled steel plate is slightly higher than that of cold rolled steel sheet. In the case of little difference in composition, the density of cold rolled steel sheet and hot rolled steel plate is the same. Hot rolled steel plate has characteristics of low hardness, easy processing and good ductility. Cold rolled steel sheet has high hardness, and it is relatively difficult for processing. But it is not easy to deform and has high strength. Hot rolled steel plate can be made into alloy steel plate by adding other elements, and its properties are also excellent compared with other high-quality steel plates.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the 16mo3 material equivalent rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of 16mo3 material equivalent steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

ST37-2 is a kind of low carbon steel with carbon content of 0.20%, similar to S235JR or Q235 16mo3 material equivalent. It's not as strong as common ASTM A36, but it is also widely applied by everyday uses and structural applications where high strength is not so important. Equal ST37-2 angle steel size: 16mo3 material equivalent Size: 20 × 20 mm to 200 × 200 mm. Thickness: 3 - 35 mm. Length: 6 m, 9 m or as required. Unequal ST37-2 angle steel size: 16mo3 material equivalent Size: 30 × 20 mm to 250 × 90 mm. Thickness: 3 to 10 mm. Length: 6 m, 9 m, 12 m or per your request.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.