Welding technology of 16mo3 steel machinability

Pageviews:

The company now has 16Mo3 steel machinability oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than 16mo3 steel machinability 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.

The use of low-alloy high-strength steel can reduce the size of structural parts and reduce weight. It must be noted that for components that may be bent, the allowable stress must be corrected to ensure the robustness of the structure. Sometimes low-alloy high-strength steel is used to replace 16mo3 steel machinability, carbon structural steel without changing the cross-sectional size. Its sole purpose is to obtain a stronger and more durable structure without increasing weight.

The mechanical properties of 30CrMo steel are as follows: tensile strength 930 MPa, yield strength 785 MPa, elongation after fracture 12%, impact absorption energy 63 J. 16mo3 steel machinability, 30CrMo steel has high strength and toughness. When the temperature is lower than 500℃, 30CrMo steel has good high-temperature strength, good machinability, medium cold bending plasticity, high hardenability and good welding performance. 30CrMo steel is generally used in quenched and tempered condition.

S355J2 steel plate rolling process is controlled rolling process. In the rolling process, the ingot rolling temperature is 1000-1050℃; in the first stage, the low-speed and large reduction rolling process is adopted, the high-temperature stage is 950-1000℃, the 16mo3 steel machinability rolling speed is 1.6-2.0m/s, the single reduction rate is 15-20%, and the cumulative reduction rate is 40-45%, so as to ensure sufficient deformation of ingot. In the first stage, the start rolling temperature is 910-930℃, and the finish rolling temperature is ≤ 870℃.As a basic building material, steel plates are currently widely used in automobiles, shipbuilding, chemical industry, aerospace and other fields. Reasonable selection of flaw detection methods to ensure the quality of 16mo3 steel machinability steel plates is of great significance to safe production. Common defects of steel plates are folding, inclusion, shrinkage, air bubbles, delamination and cracks. These problems can be discovered in time through flaw detection.

A204 Grade A steel chemical composition(%)Carbon: 0.18-0.25 Manganese max.: 0.90Phosphorus Max.: 0.025Sulfur Max.: 0.025Silicon: 0.15-0.40Molybdenum: 0.45–0.6016mo3 steel machinability, A204 Grade A steel mechanical propertiesTensile strength, kis [MPa]: 265-85 [450-585]Yield strength, min, kis [MPa]: 37 [255]Elongation in 8 in. [200 mm], min, %: 19Elongation in 2 in. [50 mm], min, %: 23

We should help solve the customer's problems in time, not just verbally, without solving the problems or shirking the responsibility. Improving after-sales efficiency can make customers feel respect. We should take their problems seriously and show sincerity. It can also give customers a good impression and reduce the negative impact.