What is p235gh steel properties equivalent?

Pageviews:

The company has a group of experienced steel plate continuous processing line construction, production management, operation and professional and technical personnel. The company is a modern enterprise integrating scientific research and development, production processing, sales and service. Our main products include hot rolled plates, seamless pipes, P235GH steel properties and steel structures. At the same time, it also adheres to international standards and adheres to the international line.

Compared with p235gh steel properties, pressure vessel and boiler steel plates have such advantages: The pressure vessel and boiler steel should be pure, and the fracture structure of the boiler steel plate should be uniform without cracks and inclusions. Besides, the strain aging sensitivity is small, and the strain aging impact value of the pressure vessel and boiler steel plate is required to be no less than 50% of the non-aging impact value. That is why pressure vessel and boiler steel plate is first choice for fabricating pressure vessels and boilers, while p235gh steel properties is not.

A335 P22 steel pipe belongs to ferrite alloy steel nominal pipe for high temperature use. Chemical composition of A335 P22 steel pipe: C 0.10-0.20, Mn 0.30-0.80, P ≤ 0.025, S ≤ 0.025, Si 0.10-0.50, Mo 0.44-0.65. Mechanical properties of A335 P22 steel pipe: tensile strength 415mpa, yield strength 205 MPa. p235gh steel properties, A335 P22 steel pipe is characterized by good process performance, less sensitivity to the heating temperature of heat treatment, good welding performance, good plasticity, and low strength, especially the high temperature rupture strength is lower than 12Cr1MoV steel. When used at the same temperature and stress, its wall thickness is about 30% thicker than 12Cr1MoV Steel.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.