What should concern during the production and processing of p295gh properties

Pageviews:

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

If A 515 grade 70 pressure vessel plates thick in 50mm or under this thickness, P295GH properties, A515 Grade 70 plates are supplied in the as-rolled condition. Normalizing treatment can be ordered, but those greater than 2 inch (50 mm) in thickness must be delivered in normalizing state. A515 Gr 70plate and sheet are widely used in petroleum, chemical industry, power station, boiler and other industries. It is used to make reactor, heat exchanger, separator, spherical tank, paint tank, liquefied gas tank, nuclear reactor pressure shell, boiler drum.

Chemical composition of p295gh properties, Q345D steel plate: C: ≤0.18; Si: ≤0.50; Mn: ≤1.70; P: ≤0.030; S: ≤0.025; Nb: ≤0.07; V: ≤0.15; Ti: ≤0.20; Cr: ≤0.30; Ni: ≤0.50; Cu: ≤0.30; N: ≤0.012; Mo: ≤0.10; Als: ≥0.015. Yield strength (MPa) of Q345D steel plate: ≤16mm: ≥345; 16-40mm: ≥335; 40-63mm: ≥325; 63-80mm: ≥315; 80-100mm: ≥305; 100-150mm: ≥285; 150-200mm: ≥275; 200-250: ≥275; 250-400: ≥265. Tensile strength of Q345D low alloy steel: 450-630(MPa). Elongation: ≥21. Impact test: -20 ℃: ≥34.

12Cr1MoVG high pressure boiler tube belongs to seamless steel tube. The manufacturing method of 12Cr1MoVG high pressure boiler tube is the same as that of seamless steel tube. High pressure boiler tubes are often in high temperature and high pressure conditions when they are used. Under the action of high temperature flue gas and steam, oxidation and corrosion will occur. p295gh properties, 12Cr1MoVG high pressure boiler tube is required to have high endurance strength, high oxidation resistance and corrosion resistance, and good microstructure stability.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.

We have replenish steel materials stocks, now there are huge stocks of S355JR, A36, p295gh properties A572 Gr 50, 16Mo3, A516 Gr 70, ABS grade A, AH32, AH36, EH36, SPA-H, SG295,SM700C etc steel materials. We can arrange delivery for those stock steel products within short time. Meanwhile, we also provide further processing for the p295gh properties steel materials, such as cutting, drilling, bending, welding, etc. Please do not hesitate to contact us if you have any steel demands.