16mo3 material equivalent vs a36 grade

Pageviews:

DIN 34CrMo4 steel Strength, high hardenability, toughness, and quenching small deformation, high strength and creep rupture strength at high temperatures. Requirements for the manufacture of higher intensity than the 35CrMo steel 16Mo3 material equivalent and tempered forging greater cross-section, such as a large locomotive traction gears, supercharger drive gear, pressure vessels, gear, rear axle, greatly affected by load and spring clip link It can also be used to 2000m deep oil drill pipe joints and fishing tools, and 16mo3 material equivalent can be used bending machine mold, etc.

Main characteristics of 12Cr1MoV Steel: compared with 12CrMoV steel, 12Cr1MoV steel has higher oxidation resistance and thermal strength. The creep limit of 12Cr1MoV steel is very close to the endurance strength value, and it has high plasticity under the condition of endurance tension; the processability and weldability of 12Cr1MoV steel are good, but it needs to be preheated to 300 ℃ before welding, and stress removal treatment after welding. 12Cr1MoV steel is widely used in Superheater, header and main steam pipe of high pressure, ultra-high pressure and subcritical utility boiler.

S700MC hot-rolled automobile structural steel chemical composition%C: ≤0.12, Si: ≤0.60, Mn: ≤2.10, P: ≤0.025, S: ≤0.015, Mo: ≤0.70, Cu: ≤0.50, Ti: ≤0.22, V: ≤0.20, Nb: ≤0.090, B: ≤0,0050The mechanical properties of S700MC steelTensile strength (σb/MPa): 750-950Yield point (σs/MPa): ≥700Elongation after breaking (δ5/%): ≥10Impact energy Akv-20°C(J): ≥27

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel 16mo3 material equivalent plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.