Alloy steel 16mo3 equivalent 50mm thick plate

Pageviews:

Focusing on the energy conservation and emission reduction objectives proposed by the municipal government, the company gives full play to the advantages of 16Mo3 equivalent circular economy formed after the comprehensive completion and operation, and vigorously promotes the implementation of energy conservation objectives. Through measures such as energy saving, technological innovation and 16mo3 equivalent management strengthening, the energy saving target of annual reduction of added value energy consumption by 7%. It has made great contribution to energy saving of over completion.

16 Mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large. Its intensity is higher than the ordinary 16mo3 equivalent carbon structural steel Q235 by 20% ~ 30%, atmospheric corrosion resistance by 20% ~ 38%.

The clad steel plate is based on carbon structural steel, which is sprayed with stainless acid resistant and heat-resistant steel on the surface. The clad steel plate is widely used to make acid and alkali resistant container. Advantages of clad steel plate: The appearance of the clad steel plate is very smooth, the quality is very good, and it will not rust. Disadvantages of clad steel plate: the 16mo3 equivalent, clad steel plate has better requirements for production technology and are more expensive.

Large-thickness 16mo3 equivalent, Z35 grade steel plate is a kind of extra-thick steel plate that is applied under specific environmental conditions, such as the key parts such as the turbine seat ring and guide vane of the generator set. It has high requirements for safety, reliability, and long service life. Develop 200mm-300mm thick steel plate of Z35 level, to ensure that the layer tear resistance reaches Z35 level. 300mm thick Z35 grade steel plate can be used not only in the hydropower industry, but also in the manufacture of other large key equipment, and has broad prospects.

As per JIS G3101 standard, the Carbon (C), Silicon (Si) and Manganese (Mn) content of SS400 steel plate are not controlled. Phosphorus (P) content of 16mo3 equivalent, JIS SS400 steel plate is 0.050% Max and Sulphur (S) content is 0.050% Max. The SS400 steel melting point is 1430 Degree Celsius, Brinell Hardness is 160HB, density is 7.85g/cm3, Young’s Modulus is 190-210Gpa. The strength and elongation of JIS SS400 steel plate varies with thickness. Generally, the tensile strength of SS400 steel plate is 400-510 Mpa. Elongation is above 21%. Yield strength ≥245Mpa for thickness≤16mm. When the JIS SS400 steel plate is thciker than 100mm, the yield strength shall not less than 205Mpa.

For ASTM A573 Grade 70/A573 Gr.70 carbon manganese silicon steel plates, our company would issue the original mill test certificate 16mo3 equivalent EN 10204 3.1 for clients when arrange delivery, so that clients can trace the A573 Gr.70 plates origin easily.

The after-sales service department will pay return visit to each customer by call or email, report problems found during the return visit in time, and discuss with the production and quality inspection center to propose effective solutions and follow up in a timely manner, so as to ensure the benefits each customer are fully guaranteed, and to provide customers with more value-added services.