Decision factors of thickness of p235gh steel performance

Pageviews:

Q420q steel material is a kind of structural steel plate for bridges, the grades are Q420qD, Q420qE, Q420qF.Q420q steel chemical composition: C: ≤0.11, Si: ≤0.55, Mn: 1.0-1.7, Nb: 0.01-0.09, V: 0.01-0.08, Ti: 0.006-0.03, Cr: ≤0.50, Ni: ≤0.30, Cu: ≤0.30, N : ≤0.008, Al: 0.01-0.045.Steel delivery status: delivered in the thermomechanical rolling state, and the steel plate should be trimmed for delivery.

Compared with 15Cr steel, 20Cr alloy has higher strength and hardenability. The critical hardening diameter in oil is 4-22mm, and the critical hardening diameter in water is 11-40mm, but the toughness is poor. This thickness of P235GH steel alloy steel thickness of p235gh steel still has a tendency to grow grains during carburization, and direct quenching at lower temperature has a greater impact on impact toughness, so secondary quenching is required after carburization to improve the toughness of the core of the part, and there is no temper brittleness.

There is an inherent difference between the cold forming properties of low-alloy high-strength steel and carbon structural steel. First of all, a certain amount of permanent deformation of low-alloy high-strength steel requires greater force than thickness of p235gh steel, carbon structural steel of the same size. Second, when low-alloy high-strength steel is formed, a slightly larger allowable amount for springback should be given. According to experience, unless the low-alloy high-strength steel is processed to control the shape of inclusions, it is necessary to use a larger bending radius than carbon structural steel during cold forming.

If you want to find wear resistant steel plates or abrasion resistant steel supplier and exporter in China, please visit us. We are one of the leading thickness of p235gh steel wear resistant steel plates manufactures and stock keepers. We have large stocks for wear resistant steel plates of various grades and dimension. We can not only send offer at the first time, but can also provide technical support and give you professional suggestions and answers about NM400 thickness of p235gh steel steel specifications, difference between hardox 400 and AR400 and so on question about wear resistant steel plates. Come on! Just call us or send email.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel thickness of p235gh steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.