p235gh material specification seamless pipe diameter

Pageviews:

Our after sales department is an very important part of our department structures. After the customer receive steel materials, our after sales department will follow up regularly and solve problems for them in time if they have the needs. We romise to return the goods for free for its lifetime if it is quality of the steel material itself. Meanwhile, if you have any advice or complaints, also welcome to feed back to our after sales department, and we are trying to give better service to you.Smelting process of P235GH material specification, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.S355J2 steel plate yield strength Rp0.2≥265mpa, tensile strength RM: 450-680mpa, elongation a≥12%, impact energy Kv2≥27J, tensile area shrinkage Z≥35% in thickness direction. p235gh material specification, S355J2 steel plate has good internal quality, high density and stable performance.Meaning of S355J2-Z35: J2 requires negative 20 degree impact, and Z35 is the Z-direction performance of S355J2 steel plate.The meaning of S355J2 + N-Z35: J2 requires negative 20 degree impact, N means normalizing rolling rather than normalizing. Z35 is the Z-direction performance of S355J2 steel plate, p235gh material specification.The preparation of p235gh material specification galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for p235gh material specification centralized control, two-layer welding process, reducing the possibility of incomplete penetration.The after-sales service personnel understand the user's ideas and needs in detail, and stand on the other side's position and interests. Actively communicate with users and help them solve practical problems. This not only solves the service problem, but also improves the customer's trust in the company.Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.