p265gh stainless steel should be promoted and utilized more

Pageviews:

Our company has P265GH stainless steel strong technical force, complete production equipment, advanced production technology, perfect testing methods, and high quality. It has a Class D (Class I and Class II pressure vessel) manufacturing license, and has passed the China Beijing Quality Center GB/T19001-2000 -ISO9001: 2000 quality certification. We can also supply p265gh stainless steel deep processing service for products p265gh stainless steel like cutting, drilling, bending, welding and grinding.

p265gh stainless steel, Q460 material is a low-alloy high-strength steel. Q stands for the strength of steel. 460 means that plastic deformation occurs only when the strength of the steel reaches 460MPa. That is, when the external force is released, the steel can only maintain the shape of the force and cannot return to its original shape. This strength is greater than that of ordinary steel. Tensile strength is 550-720MPa, elongation: 17%, Q460 material is made by adding Cr, N, V, Ti and other alloying elements on the basis of 16Mn steel.

In the manufacturing process of boiler pressure components, raw materials must undergo complex processing deformation and welding, so the steel used to manufacture the boiler must also have good process performance. All materials p265gh stainless steel used to manufacture pressure parts must conform to the relevant national standards for boiler steel. The defects such as delamination, non-metallic inclusion, porosity and looseness in the steel shall be as few as possible, and white spots and cracks are not allowed.

We can cut the large steel plates p265gh stainless steel by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the p265gh stainless steel product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.

10# seamless steel pipe chemical composition : C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. 10# seamless steel pipe mechanical properties: recommended heat treatment temperature: 930℃, tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%, impact energy is not required. p265gh stainless steel, 10# seamless steel pipe has high plasticity and toughness, no temper brittleness tendency, and good weldability. Its machinability under cold drawing or normalizing treatment is obviously improved. In cold state, 10# seamless steel pipe is easy to be extruded and molded, but its strength is low, and its hardenability is very poor.

To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent p265gh stainless steel products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the p265gh stainless steel technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.