p295gh en 10028-2 properties and features

Pageviews:

S420M and S420ML are hot-rolled flat weldable fine-grained structural steel with a thickness less than 120mm. P295GH en 10028-2, S420 steel is a non-alloy structural steel. The S420ML steel is composed of the following parts: S (structural steel); 420: the yield strength value of structural steel with a thickness less than 16mm: not less than 420; M represents his delivery status, that is, hot mechanical rolling; L: The impact when the temperature is not lower than -50 degrees is marked with a capital letter L.

Large-thickness p295gh en 10028-2, Z35 grade steel plate is a kind of extra-thick steel plate that is applied under specific environmental conditions, such as the key parts such as the turbine seat ring and guide vane of the generator set. It has high requirements for safety, reliability, and long service life. Develop 200mm-300mm thick steel plate of Z35 level, to ensure that the layer tear resistance reaches Z35 level. 300mm thick Z35 grade steel plate can be used not only in the hydropower industry, but also in the manufacture of other large key equipment, and has broad prospects.

In the second step of hot rolling process, different finished mills are used to roll billets or continuous casting billets into finished steel of proper shape and size. This p295gh en 10028-2 production process is called finished product production, which is generally divided into two stages of rough rolling and finish rolling. In the roughing stage, a large amount of reduction (reduction per pass) is adopted to reduce the number of passes and improve the output; after roughing, the finishing stage is entered, and the finishing is carried out with a small amount of reduction to achieve a good surface and accurate p295gh en 10028-2 size.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.