p295gh material standard Normalized Plate

Pageviews:

For S420NL weldable fine grain structural steel plate, it is produced under specification EN 10025-3. The yield strength of S420NL plate shall be above 420Mpa for the thickness below 16 millimeter, 400MPa min. for thickness below 40mm, 390MPa min. for thickness below 63mm. The tensile strength for thickness below 100mm of this steel grade S420NL shall be within 520-680Mpa. For the Mill test certificates of steel S420NL,P295GH material standard, our mill would like to issue format according to EN 10204 3.1.

30CrMnSiA steel delivery status: p295gh material standard, 30CrMnSiA steel shall be delivered in the state of heat treatment (normalizing, annealing or high temperature tempering) or without heat treatment, and the delivery status shall be indicated in the contract. 30CrMnSiA steel has high strength, but it belongs to medium carbon quenched and tempered steel, with large hardenability, so its weldability is very poor. After quenching and tempering, 30CrMnSiA steel has high strength, enough toughness and good hardenability. And can be used as grinding wheel shaft, gear and sprocket.

If the chromium content in p295gh material standard alloy steel reaches about 12%, dense chromium oxides will be formed on the surface of the steel, which will greatly improve the corrosion resistance of steel in oxidizing media. Chromium, aluminum, silicon and other elements can improve the oxidation resistance of steel and the corrosion resistance of high-temperature gas, but excessive aluminum and silicon will deteriorate the thermoplasticity of steel.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.