What is chemical composition of p265gh en 10028-2

Pageviews:

Nowadays, transportation is an important factor in economic development. Our company's rapid development is also inseparable from a good geographical location. The company is located in Zhengzhou, an important P265GH en 10028-2 heavy industry area in Central China. Whether you are in Beijing, Shanghai or Guangzhou, you can visit our company very easily. My factory is nearby, convenient transportation and time saving.

15CrMo alloy plate is a heat-resistant steel with pearlite structure, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperatures, and has a certain resistance to hydrogen corrosion. Due to the high content of Cr, C and other alloying elements in steel, the hardening tendency of p265gh en 10028-2 and 15CrMo alloy plate is obvious and the weldability is poor. After welding, local high temperature tempering treatment should be carried out. The heat treatment process of 15CrMo alloy plate is as follows: the temperature rise rate is 200°C/h, the temperature is raised to 715°C for 1 hour and 15 minutes, the temperature drop rate is 100°C/h, and the temperature is reduced to 300°C before air cooling.

Ordinary medium and thick steel plate p265gh en 10028-2 is a kind of deoxidized steel. The oxygen content of the steel liquid is relatively high, and a lot of gas will be produced during the production process to make the steel liquid boil, so it is also called boiling steel. Advantages: this kind of steel plate has smooth surface, good quality and easy processing. Because this kind of steel plate has no concentrated shrinkage cavity, the amount of deoxidizer is very small and the price is lower than other steel plates.

Magnetic particle flaw detection is only suitable for detecting surface defects, which means that by laying magnetic powder on the surface of the equipment and using its aggregate shape on the surface defects of the magnetic material equipment to determine the position, size and shape of the defect. This p265gh en 10028-2 method has a relatively low cost and is easy for steel production enterprises to adopt in batches. However, for special steel profiles with deeper thickness, whether this method is used to detect hidden defects is yet to be verified.

"ASTM A516 Grade 70 plate is a boiler / pressure vessel quality of steel plate for use in low to moderate services. It has improved notch toughness. p265gh en 10028-2, A516 Grade 70 steel plates can be produced with thick up to 200mm.For boiler steel plate A516 Grade 70, the yield strength shall be above 260 Mpa, tensile strength from 485 Mpa to 620 Mpa.A516 Garde70 steel plate is equivalent to the P355GH and 490B grades. "

Respect customers and treat each other sincerely. Customers are always right. Always remember that the user is the God of the enterprise, respect the customer, and accept the customer's opinion modestly is the guarantee of the long-term development of the enterprise. Adhere to this concept, so that the service and the product are the same, long-term.