What is the maximum thickness of p295gh en 10028-2

Pageviews:

After the steel plate is produced from the original factory, it will pass through a series of transportation and storage links and then be delivered to the processing workshop. During this period of time, the steel plate surface will contact with the air continuously, which will inevitably produce a layer of oxide skin. The oxide skin is a difficulty in the treatment process. It has high melting point, is not easy to burn and dissolve, increases preheating time, reduces cutting speed. Therefore, the surface of the P295GH en 10028-2 plate should be derusted before cutting.

Q345R steel is common low alloy steel, which is commonly used for boiler and pressure vessel. The delivery status includes hot rolling or normalizing. Q345R steel yield strength is 265-345MPa, tensile strength is 510-640MPa, elongation is greater than 21%, and zero degree V-shaped impact energy is greater than 34J. Q345R steel standard is GB713. Q345R steel has good comprehensive mechanical and technological properties. The content of p295gh en 10028-2 phosphorus and sulfur of Q345R steel is slightly lower than that of low alloy high strength steel plate.

We can supply profiled plate in a range of grades in thicknesses up to 400mm and dimensionally we can cut up to 24 meters in length and 5 meters wide with flame cutting, plasma cutting and laser cutting service. This capability is backed by an in-house CAD team, capacity that enables us to work to short lead times and an established delivery network that ensures you receive the steel p295gh en 10028-2 products when you need it.

We can cut the large steel plates p295gh en 10028-2 by your requirements, but to the width and length your demand; we can make the surface of the cut steel plate to be bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing. For the p295gh en 10028-2 product thickness under 30mm, we mainly cut by laser cutting; for thickness over 30mm, mainly OXY-cut, flame cutting. The processing plates conclude cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing.