What needs attention during the processing of p355gh plate

Pageviews:

The correct choice of billet type, section shape, size and weight are of great significance to P355GH plate steel rolling production. Steel rolling production has certain technical requirements for raw materials, such as steel type, section shape, size, weight, and surface quality. The consideration of these technical requirements is necessary to ensure the quality of steel. It should also be specifically considered when determining and selecting the blank. The p355gh plate rolling method can be divided into cold rolling and hot rolling according to the rolling temperature.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.

SA516 Gr 60 (HIC) PVQ plate heat treatment:p355gh plate, SA516 Gr 60 (HIC) PVQ plate with thickness ≤ 1.5 in, (40 mm) is usually supplied in rolling state. It can also be ordered by normalizing or stress relieving, or normalizing and stress relieving state.p355gh plate, SA516 Gr 60 (HIC) PVQ plate with thickness > 1.5in. (40mm) shall be normalized.Unless otherwise specified by the demander, the SA516 Gr 60 (HIC) PVQ plate with thickness ≤ 1.5in, (40mm) shall be normalized when notch toughness is required.

The hardness of the steel plate is very high, so special equipment is needed to complete the processing and cutting of these materials, p355gh plate. In order to cut the plate into an ideal size, the steel plate cutting needs to use natural gas flame for preheating, which will generate a large amount of oxygen flow during the operation. These substances will oxidize the steel plate, and then form a cutting edge, then the cutting operation process is basically completed. In the actual processing work, there are many different classifications for steel plate cutting.